The vertical type commonly known as the long-rod pump is installed. The standard depth of the submerged support water level is 1200mm, which can be extended to 1500mm below the liquid. The downdraft depth can be adjusted and lengthened; the use site requirements are: sedimentation tanks, mines, riverbed dredging and other sites that are convenient for fixed installation and use.
The processed material slurry is: mixed slurry with large particle solid content ratio such as waste slag, mud slurry, slag, coal ash slurry and tailings. The supporting power is diesel and electric two driving modes; it can be mounted with belt grooved wheels and pump electric couplings.
The specific gravity of the incoming material is required to be in the range of 1.1-2.4, the solid content concentration is less than 50%, the slurry does not contain corrosive slurry, and the PH value is greater than 5 can be used. The selection range is not limited. The flow ratio is controlled by 4 inches 100 liters, 6 inches 200 liters, 8 inches 500 liters, etc., and the lift outlet pressure can be adjusted from 0.1-.08.