The following requirements should be noted when using the Ziquan sand pump :
1. When installing the sand pump, there should be a fixed foundation as a support, and the support points of the embedded iron combined with the horizontal pump should be welded firmly in time;
2. The power wiring should be equipped with weak power systems such as leakage protection, overload protection, thermal protection, etc. to control the power supply device or protection device;
3. The four bolts at the corner of the fixed and stable sand pump need to be punched and screwed to prevent loosening and vibration, and they need to be protected by thick pads;
4. When the coupling of the overdrive part is assembled and adjusted, a weak start is required. The direction of the pump head rotation is mainly based on the factory steering of the Ziquan pump.
5. The front end of the sand pump needs to be connected with a wear-resistant hose and inserted into the sand layer to start the pump. The sand extraction process is controlled by the liquid level pressure instrument to control the amount and proportion of sand produced;
6. Application of sand pumping principle The job can be carried out through the support of Ziquan technical staff. The speed of sand loading and the design of the supporting device docking technology is reasonable.